Penrite ENVIRO+ GF-5 5W30 Full Synthetic Engine Oil 5L EPLUSGF5005

Penrite ENVIRO+ GF-5 5W30 Full Synthetic Engine Oil 5L EPLUSGF5005

ENVIRO+ GF-S is a premium, full synthetic, SAE 5W-30 engine oil. It uses an advanced mid SAPS (Sulphated Ash, Phosphorus and Sulphur)* HYBRID+ additive technology suitable for petrol/electric vehicles offering superior protection against colder engine operating temperatures, frequent stop/starting, water condensation and fuel dilution.

Enviro+ GF-S is licensed by the API (American Petroleum Institute) to meet SP Resource Conserving, SN Plus and ILSAC GF-6A specifications ensuring quality and satisfaction.

Application
ENVIRO+ GF-S is designed for use in modern 4, 6 & 8+ cylinder multi-cam, multi-valve (including VVT), naturally aspirated, supercharged & turbocharged petrol low emission engines including petrol/electric hybrids.

Enviro+ GF-S may be used where SAE 5W-20 and SAE 5W-30 grade oils are recommended by the manufacturer. It can be used where API SP, SN Plus or previous specifications API SN (2010-2020), API SM (2006-2010) and API SL (2002-2006) as well as where ILSAC GF-6A, GF-5, GF-4 & GF-3 fuel economy oils are recommended.

ENVIRO+ GF-S is an API SP Resource Conserving, SN Plus and ILSAC GF-6A licensed product, providing improved turbocharger deposit control, oxidation, aeration, fuel economy, fuel economy retention, timing chain and idle stop wear protection and enhanced low speed pre-ignition (LSPI) protection over API SN / ILSAC GF-5 grade oils. It is recommended for most General Motors petrol driven engined vehicles where GMW 17332 is specified. This includes Holden Barina, Commodore, Captiva, Cruze, Malibu, Volt, Statesman & Caprice vehicles. It is also suitable for use in all HSV series vehicles post this date.

ENVIRO+ GF-S can be used in Chrysler /Jeep vehicles that specify MS-6395 and in Ford vehicles where Ford M2C946-A is the required specification. It can also be used by other manufacturers such as –
Chrysler Ford Holden Honda Hyundai Infinity
Kia Lexus Mitsubishi Nissan SAAB Subaru
Toyota and many other makes and models

Vehicles and Fuel Types
ENVIRO+ GF-S is suitable for use in passenger cars, 4WD’s & light commercial vehicles. It can be used with Petrol, LPG (Dual Fuel & LPi Liquid Phase Injection), E10 and is designed for use with flexi-fuel vehicles that can run on both unleaded petrol and E85 ethanol blend fuels. It is the primary choice of lubrication for late model vehicles that are running ethanol blends of fuels. It is also suitable for late model vehicles with dedicated LPG systems including those with direct injection LPI. It is also suitable for use in Hybrid petrol/electric vehicles requiring this viscosity grade and specification. It is not recommended for use
API Licensed and testedfor quality assurance
LASTEST API SP Resource Conserving and ILSAC GF-6A oil specifications
MAXIMUM wear protection, MINIMUM sludge formation and REDUCED piston deposits
ENHANCED LSPI (Low Speed Pre-Ignition) protection
IMPROVED engine durability, better fuel economy, increased wear protection.
REDUCED Turbo Charger Deposits
BETTER wear protection for “Idle Stop” engines
IMPROVED oxidation, deposit control and aeration
BETTER fuel economy and fuel economy retention
LONGER Engine oil drain intervals
CATALYST and Oxygen sensor friendly
ETHANOL fuel compatible – Safe with E85
OPTIMISED for HYBRID Petrol/Electric vehicles
MAXIMISES fuel economy**